|
|
Brushed / Brushless D.C. Servo
Controller
The RTC3000 and RTC4000 are miniature servo controllers with built-in
amplifier for use in OEM equipment to control very small brushed or
brushless DC servo motors.
The RTC3000 measures 3.68 x 1.815 x 0.35 inches and makes all
connections on the long edge side. The RTC3000 operates from a 12 to 24
VDC source and switches 1 Amp of continuous and 3 Amp of peak current.
The RTC4000 measures 1.18 x 2.15 x 0.50 inches. The RTC 4000 operates
from a 12 to 24 VDC source and switches 3 Amp of continuous and 6 Amp
of peak current.
|
|
|
|
|
The small motor controller outputs are protected
from short circuit to each other, to supply and to ground. The 32K of
internal program memory can be used by jumpering two signals together at
the memory port. Alternatively, the port signals can be routed to an
external memory module. Either way, the unit can be programmed in BASIC
to operate stand-alone. Stand-alone programs can interact with all inputs
and outputs of the RTC3000, affording total flexibility and a multitude
of additional interface options. The controller communicates over RS232
and RS485. All signal ports have supply and ground to power external
devices such as limit switches, encoders, hall sensors, etc.
Like the SmartMotor, both the RTC3000 and RTC4000 have an additional
network port called AniLink that interfaces with a vast array of
peripherals.
 RTC3000 and RTC4000 Servo
Controller (Catalog page)
|
