|
AIO-100/110/116
AniLink
Analog I/O Card
The
AIO-100 is a four input, one-output analog I/O peripheral
module to be used with SmartMotors and related control products.
The card connects through the Anilink™ bus. This module allows an
Animatics controller to read analog signals from external devices
or control an external system with an analog signal. The range of
signal voltage for both input and output is adjustable to a maximum
of 0 to +5 VDC with eight bits of resolution. Upper and lower limits
are independently adjustable for the A/D or D/A functions, allowing
the full 8 bit accuracy to be applied to small signal ranges. Each
input channel can be centered independently. Up to eight AIO-100
modules can be addressed by a single SmartMotor™. The card is powered
by +5 V and ground from the SmartMotor™ or controller. These units
are equipped with a voltage regulator allowing support from an external
+6V to +24 V source.
The AIO-116 has similar characteristics except for the addition
of 16 bit accuracy and no output.
The AIO-110 has four analog inputs, one 0 to 10 VDC and three
0 to 5 V. There is one analog output that creates 0 to +10 VDC and
scaled output of 0 to +5 VDC. The resolution of the output signal
is 8 bit.
Features
One analog output.
Four analog inputs.
Two parallel auxiliary inputs.
AniLink compatible.
Firmware supported.
Benefits
Allows AniLink™-equipped controller to control outside processes.
Efficient control feedback or data input, independently tunable.
Panel/controller parallel inputs; operator convenience and safety.
Simple plug-in operation.
Easily programmable: Series 5000 or SmartMotor™ controls.
Special firmware support for porportional joystick applications
on Series 5000 controllers.
Electrical:
Bus DC line voltage: 5VDC
Auxiliary Power Input: + 6 to +24VDC
Normal Maximum DC Current: 40 mA
Inputs (four): 0 - 5VDC max., 8 bits accuracy
Output (one): 0 - 5VDC max., 8 bits accuracy
Mechanical:
Dimensions: see figure
Weight: 1oz (28g)
Environmental:
Operating Temperature: 0 to 50? C
Storage Temperature: -20 to 70? C
Humidity: 0 to 90% non condensing
|
